The Nutcracker Project
30 nutcracker was manufactured for various parts of the UK.
Ten of the units was placed around Lichfield over Christmas time.
The Wigan Council Heart Project
7 Hearts was manufactured and installed around Wigan.
This project was to raise awareness for heart disease
Volvo Bull Nose Front End.
Light weight fully fibreglass front end.
Split mould was manufactured to produce finished product.
Santa's Grotto Project
The Christmas Grotto – The 5 fibreglass stars measured 4 meters high by 4 meters wide,
Units was made up from 5 different sections
Fibreglass Acid Dipping Tank
Here is a 12mm fibreglass tank which was manufactured to acid-dipping cars.
This tank was manufactured using chemical resistant resin and gelcoat.
Fibreglass Horse Project
Full fibreglass horse finished in a grey gelcoat.
Popular within the equestrian field, Perfect for display/mannequin purposes.
Fibreglass Dash Panel
Here is a 2mm fibreglass dash board which was manufactured for a Honda civic rally cars
Reducing weight and improving rally performance and speed.
Fibreglass Time Attack Bumpers
Fibreglass bumpers created for the event organiser, Time Attack.
A mould was created and designed exclusively for this project.
Custom Fibreglass Pool
This fibreglass pool was created for a Christmas display in Leeds shopping centre
Below you can see before and after picture of a roof fully restored using weather- resistant fibreglass
Fibre Moulds UK Ltd
UNIT 15, Twin Lakes Industrial Park, Bretherton Road, Lancashire, PR26 9RF .
Tel: 01772 305458 Email: firstname.lastname@example.org